Compare Products

Stihl TS 440 Cutquik
Stihl TS 440 Cutquik

Specs

General Information

Manufacturer
Stihl
Stihl
Model
TS 440 Cutquik
TS 440 Cutquik
Model Code
TS440STIHLCUTQUIK
TS440STIHLCUTQUIK
Color
Orange / White
Orange / White

Dimensions

Weight
24.7 lb. (11.2 kg)
24.7 lb. (11.2 kg)

Engine

Displacement
66.7 cc (4.07 ci)
66.7 cc (4.07 ci)
Fuel Type
Gas
Gas
Fuel Tank Capacity
24.5 oz. (725 cc)
24.5 oz. (725 cc)

Operational

Speed

Engine - 9,000 rpm

Max Spindle - 2,525 rpm

Engine - 9,000 rpm

Max Spindle - 2,525 rpm

Cutting Depth
Maximum - 4.9 in. (125 mm)
Maximum - 4.9 in. (125 mm)

Other

Miscellaneous

Arbor size - 20 mm

Maximum wheel size - 350 mm (14 in.)

Arbor size - 20 mm

Maximum wheel size - 350 mm (14 in.)

Features

Features

  • REDUCED-EMISSION ENGINE TECHNOLOGY - CARING FOR NATURE: The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
  • DECOMPRESSION VALVE: The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
  • ELECTRONIC WATER CONTROL (EWC): Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
  • X2 AIR FILTRATION SYSTEM: The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
  • BAYONET-STYLE FUEL CAP: With retainer for easy use, even with gloves on.
  • ON/OFF SWITCH: Conveniently located on top of handle and recessed to prevent accidental shutdown.
  • ANTI-VIBRATION SYSTEM: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
  • STIHL ELASTOSTART™: The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
  • WATER CONNECTION: Water connection with shut-off valve and quick connector.
  • INTERGRATED WATER HOSE: Helps prevent hose damage.
  • STIHL QUICKSTOP® Wheel Brake: Allows extended guard adjustability by reducing the risk of injury from kickback when the guard has been adjusted to expose the top portion of the wheel.
  • WHEEL GUARD: Expanded wheel guard adjustability range increases utility of machine for certain cutting circumstance.
  • CHOKE LEVER AND PURGE PUMP PRIMER: Conveniently located together for easier starting.

Features

  • REDUCED-EMISSION ENGINE TECHNOLOGY - CARING FOR NATURE: The STIHL Inc. “Caring for Nature” seal identifies its powered products that are more environmentally conscious, producing zero or low exhaust emissions. STIHL Inc. defines “low exhaust emissions” as being cleaner than EPA and/or CARB exhaust emission standards.
  • DECOMPRESSION VALVE: The decompression valve reduces the compression in the combustion chamber during cranking and helps reduce the effort needed to pull the starter rope.
  • ELECTRONIC WATER CONTROL (EWC): Electronic Water Control allows the operator to easily adjust the flow of water while cutting and stops the water flow when the machine is at idle.
  • X2 AIR FILTRATION SYSTEM: The X2 Air Filtration System revolutionizes the cut-off machine industry by allowing air filters to last up to a year, based on cutting conditions. Outside air enters the system in a swirling motion, removing 80% of dust particles. This pre-cleaned air is then routed through the primary and secondary air filters before being sent into the engine. The X2 Air Filtration System is virtually maintenance free and maintains an incredible 99.96% cleaning efficiency.
  • BAYONET-STYLE FUEL CAP: With retainer for easy use, even with gloves on.
  • ON/OFF SWITCH: Conveniently located on top of handle and recessed to prevent accidental shutdown.
  • ANTI-VIBRATION SYSTEM: STIHL has developed a system for minimizing the vibration levels of handheld outdoor power equipment. The STIHL anti-vibration system helps reduce operator fatigue and provides a more comfortable working experience.
  • STIHL ELASTOSTART™: The ElastoStart™ starter handle is a feature of STIHL. It is a starting grip with a built-in shock absorber that helps reduce the effort when pulling on the starter cord. The ElastoStart™ starter grip noticeably reduces the sudden peak forces (compression) normally felt during cranking. The forces which occur at the grip after the first compression stroke are smoothed out.
  • WATER CONNECTION: Water connection with shut-off valve and quick connector.
  • INTERGRATED WATER HOSE: Helps prevent hose damage.
  • STIHL QUICKSTOP® Wheel Brake: Allows extended guard adjustability by reducing the risk of injury from kickback when the guard has been adjusted to expose the top portion of the wheel.
  • WHEEL GUARD: Expanded wheel guard adjustability range increases utility of machine for certain cutting circumstance.
  • CHOKE LEVER AND PURGE PUMP PRIMER: Conveniently located together for easier starting.